Electric motor 2 or 4 poles | 12 V DC

Magnets: Permanent ferrite (2 poles version) or rare earth (4 poles version)

Shaft bearing: sintered bronze bearings
EMC: Class 5
Thermal Protector: integrated PTC
Hall sensors: 1 or 2 integrated
Stall rotor torque for 2-pole version: 0.23-0.30-3 Nm depending on the winding
Diameter: 30-35.7 mm
Idle speed: 3700-5000 rpm / min depending on the winding
Noise <41 dB(A)
Stall torque for 4-pole version: 1.5-3 Nm depending on the winding
Diameter: 30 mm
Idle speed: 6000-7000 rpm / min depending on the winding
Noise <41 dB(A)